Friday, December 3, 2010

Schwinn Caliente Finished

Hello and Welcome. I have finished the Caliente project, except for the paint touch-up. The weather has turned cold and I will have to wait for it to warm up a little. As for the "finish pics" I went ahead and photographed it (as is). It still looks pretty good. But a little paint touch-up will go a long way towards making it look better. I hope to be doing that real soon.
Above: I found these levers laying around the shop and decided to polish them up and use them in place of the generic levers it came with. These are no doubt off one of the 5 or 6 Continentals I have re-built in the past 20 months. I still might up-grade the brakes to some vintage center-pulls. But if I do that, I will want to up-grade the wheels too.....

Above: I have no idea which bike these pedals came off of. I found them in the pedal box. The original pedals were very dull with no chrome. I decided it needed a little bling!


Above: This is the bike I was saving this Specialized (take-off) saddle for. You might remember it from the red Varsity mock-up. It is quite comfortable and still very sporty looking. I would have used it on the Varsity, but I was really trying to keep the cost down. Most of my customers are college students and many have a very tight bike budget. So I like to keep a few less expensive bikes around.


Above: Shown with new Kenda 27 x 1-1/4 Skin-Walls mounted on the original wheels.
I don`t like the way the skin-walls photograph. They look like white-walls. I think
I will be going back to using the Kenda Gum-Walls in the future. I polished-up and trued the wheels. I did find one little ding. I marked it with a Sharpie marker and
banged it back with a ball-peen hammer. I have a trick for doing that (hammering out the ding) I`ll have to do a post about that some time.


Above: I like to cut my cable housings with a cutting wheel on a high-speed drill.
I insert the little nail quickly after cutting to prevent the end from melting shut.
I sometimes mark the spot to be cut with a small piece of tape. After I make the cut I trim the end with a small pair of scissors. The wheel will also cut through housing and cable together. If you have a long universal cable with housing, you can cut it in the middle and use both ends. Of course you will want to measure first.

OK, Here are some pics of the finished (but not touched-up) project.






I found some NOS gum hoods for my next project a Raleigh "Technium." I paid a little too much for them. However they are a perfect match. And I want this Raleigh to be as close to perfect as I can make it. I should have a progress report soon about the Technium. Till next time Ride Safe and remember to Always RESCUE,RESTORE&RECYCLE Cheers,Hugh

13 comments:

  1. Yes, please post about fixing the ding in the rim. I've always wondered how I could get those out. The Caliente looks great!

    ReplyDelete
  2. Hey Bill,
    Thanks, I will do that post as soon as I have a curb-dinged rim to repair. If necessary I will see if I can find one laying around the shop. That should not be a problem. (: Always lots of old parts & wheels laying around.

    ReplyDelete
  3. Thanks Trevor,
    I agree the Royal Blue was a great color frame to work with. I`m finally getting comfortable with the modern way of taping handlebars. The final angle cut took a while to get right. But I think
    I finally got it (:

    ReplyDelete
  4. While the saddle looks wonderful, won't a Specialized saddle corrode a Schwinn due to galvanic incompatibility?

    Seriously, I'd like to hear about rim ding removal as well.

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. That Schwinn looks great, love the tires!

    ReplyDelete
  7. Ponga el aciento blaco tambien que se mire linda

    ReplyDelete
  8. Hey Eduardo Landi
    I`m going to need a little help with this one.
    Anyone?
    Cheers,Hugh

    ReplyDelete
  9. Love the pictues of the bike. I have one the exact color even with the Kendra tires. Mine is all original except for the tubes and tires. I replaced with the Kendra tires to keep the original look. Have had it for close to twenty years and is still in great riding condition. It is great to see another one out there. Keep up the great work!!!

    ReplyDelete
    Replies
    1. Thanks Chris,
      The Caliente is a good looking bike for sure. Good to hear you are still enjoying yours. Thanks for visiting the blog and for leaving a positive comment.
      Cheers, Hugh

      Delete
  10. I have a blue 24" serial # GB804849 and Blue 26" serial # GM721XXX calienti look like big and little brother.What year are they?
    David
    davidddonahue@charter.net

    ReplyDelete
  11. Schwinn used the date code GM in July of 76 I was unable to locate the date code GB. However if they are Calienti's I doubt this code interpretation is correct. If they were manufactured outside the US
    it will be harder to break the code. I would check the components for dates. Check the back side of the brake caliper arms and both derailleurs. You may have to remove them to do this properly.

    ReplyDelete

 
Cycling Blog Directory