Saturday, June 4, 2011

Raleigh Persuit Fender Change / Physio Phat

Hello and Welcome,
I am taking an unplanned break to deal with a bout of Optic Neuritis.. I have a great team of doctors helping me get back on track. It has been difficult to do any thing on the PC lately due to the vision problems that come along with it. I did however bring the Raleigh Pursuit back from AnnArbor Mi. to be fitted with some wider fenders,
Above: This shot shows just what little coverage the 35mm road racer fenders provide on the 27 X 1&1/4 inch Kenda K35 Gum-walls. Although the Pursuit was originally a road racer style bike with drop bars and no fenders. I should have paid more attention to the metric size specs than to the words road racer or road bike. I knew these 35mm were going t be a problem when I was installing them. But I figured with a little tweaking I could make them work.
Above: This was the worst problem area, where the rear fender clips onto the brace that is located behind the bracket shell and connects the two chain stays. But the whole thing was really tight all the way around so I did not bother making any modifications. I adjusted the fender height at the rear brake caliper connection. And adjusted the fender shape or curve by adjusting the length of the fender struts. And when I finished everything cleared, but just barely. I should have known that with a set-up this tight the first bump was going to knock the whole deal out of whack. And that`s pretty much what happened.
Above: The replacement 45mm fender cut with a hot knife. (it only looks rough on the inside) Trimming the fender after installing it allowed me to cut off just the
riht amount of plastic the get the fender to spread-out properly. And still get good coverage all the way to the connection.
Above: Use "Extreme Caution" when cutting with a hot knife. You might want to get some help with the first one. I would not recommend doing this if you don`t feel confident working with a torch and a hot knife. Having said that, I use this Stanly utility knife which has no plastic parts. I love this knife it is a combination jack-knife / utility Knife. It is designed with a quick-change blade feature. And only one of the two blades can be opened at once. I don`t know if this is still available. But I would recommend this all around knife to anyone. It is without a doubt one of the best (if not the best) knives I have owned. And this is coming from a guy who owns a 1968 Puma "White Hunter" (German made) in near mint condition.

Above: The two pieces of plastic that were cut off with the hot knife. The bike was picked-up right away (a day early)So I had no chance to get pics of the finished project. I did throw in a vintage Italian water-bottle cage and some adjustments. The young lady was kind enough to come pick-up the bike after learning about my temporary vision problem. So if I learned anything on this build it was "do your research" and "read the specs carefully" and do the conversions "metric to s.a.e." My Dad used to say "It`s ok to make a mistake, just make sure you learn from it."
BELOW: The ever evolving Physio Phat
ABOVE: Physio-Phat shown with new Kenda K-80 Red wall Cruiser tires and Multi -Sport pedals with "old style" straps and traps. (toe clips)
Below: I don`t think I ever showed the Avenir Rack. The first rack (Sun Lite)was borrowed from the Pursuit project. When I decided to go with panniers, I thought it best to not mix brands. So it was not a surprise that the Avenir panniers fit the Avenir rack perfectly.
Well I have not done enough work on the Parliament Custom-Built to rate an update.
Tomorrow I am going to take my doctors advice and spend a long week in the North Woods, mostly resting. I will take my lap-top and a digital camera. But I am not sure how that will pan-out.
I should be back online by June 12th if I am not able to post from the North Country. Thanks for your patience and well wishes. Till Next Time, RIDE SAFE and remember to Always... RESCUE, RESTORE & RECYCLE
See You Soon, Cheers,Hugh

6 comments:

  1. Rest those eyes and let the healing begin!

    ReplyDelete
  2. Best wishes for a full recovery!

    ReplyDelete
  3. Hugh I just stumbled across your blog last week from OTS and want to say first -thanks for the wealth of good info and great pictures, love your blog. And second hope you are healed up soon and can get back to doing what you love. I have recently restored a late 70's Miyata 912, just finished a Schwinn varsity that has been hanging around for 2+ years and am in the midst of working on a mid seventies Takara. You have given me lots of new ideas in your blog and your attention to detail and restoration of paint and chrome is fantastic thanks again.

    ReplyDelete
  4. Thanks Steve,
    So far my recovery is going really well (knock on wood) My new doctors are great and they are really doing a fine job. Sorry for the delayed response. I`m behind on everything and it`s gonna take me a while to get caught up. Thanks again. Cheers, Hugh

    ReplyDelete
  5. Thanks Ryan,
    I`m glad to hear you have found some useful info on my blog. I love hearing from people who have made good use of some of the information they have found. It really energizes me to hear that the blog has been helpful. And right now I`ll take all the positive energy I can get. Also a sincere Thanks for the well wishes. My recovery is going well. I expect to be posting some new restoration stuff real soon (:
    Cheers, Hugh

    ReplyDelete
  6. Thanks Jay,
    I really do appreciate that. I have been amazed by all the well wishes from readers and friends.
    I should be posting some restoration stuff again real soon. Maybe I can do the " must have tool post" as well. After all tools are my second favorite topic. Thanks again.
    Cheers,Hugh

    ReplyDelete

 
Cycling Blog Directory